Landfill Closure & Cover High Solid Hydroseeding Slurry Binder
in Massachusetts

MassDOT rules demand you grade the topsoil and remove clods to guarantee your hydroseed slurry sticks. You must spray organic soil conditioners and wood fiber mulch to create a bonded fiber matrix. This locks down the subsoil and forces stormwater to infiltrate the ground during severe rain instead of washing out your site.

Operational Constraints for Landfill Closure

Daily and intermediate landfill covers face severe wind erosion, off-gassing, and strict regulatory leachate controls. Loose soils blow offsite or wash into drainage systems, instantly triggering compliance violations. The objective is to seal the surface without adding excessive weight or moisture to the waste mass. You need a high-viscosity hydraulic hydro-cap that forms a durable crust over the refuse. The polymer must lock in dust and aggressively repel rainwater to prevent it from infiltrating the cell and increasing the site's expensive leachate treatment volume.

Meeting MassDOT Standard Specifications Edition 2026 Specifications

OHRA GreenTack anchors seed and mulch directly to the subsoil, providing the rain-fast shear strength required by MassDOT Standard Specifications Edition 2026. Its microplastic-free botanical hydrocolloid network forms a 3D matrix. It resists high-velocity storm runoff and keeps synthetic toxins out of the watershed.

The matrix prevents "fisheye" lumping inside your hydroseeder pump. This stops pump cavitation and reduces friction head loss. You maximize your tank's spray payload and eliminate constant agitation adjustments on the job site.